How To Get A Bike Lock Off? (TOP 5 Tips)

A pair of wire cutters or a pair of bolt croppers/cutters should do the trick. This is one of the safest and easiest ways to remove a bike lock without keys. Using an angle grinder, you’ll be able to cut through any bike lock. If you have an angle grinder or other similar power tools, you may decide to use these.

What is the best way to lock a bike?

  • The most secure way to lock your bike is with two locks. And ideally to a bike rack that’s cemented into the ground. The first lock should go around the back wheel, the frame and the bike rack. The second should go around the front wheel, the frame and preferably the bike rack as well.

What do I do if I can’t unlock my bike lock?

If there’s ice inside it will encourage it to melt. Breathing into the lock can be enough to melt any ice in there, or if it is possible, take the lock inside and allow it to warm up. This should then have solved your problem and you should be able to fully insert and twist the key to unlock your bike!

How do you unlock a Kryptonite bike lock without a key?

If you want to learn how to unlock a kryptonite bike lock, the pen trick can do the job for you. It involves using a plastic pen to bypass the lock. All you have to do is remove the tip of the pen and press the cylinder into the keyway and then do a slight turn. This will open the lock if done correctly.

You might be interested:  Where To Buy A Bike Basket? (Question)

How do you pick a bike lock with a paperclip?

Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you’d normally do.

How do you break a bike lock without a key?

Option 1: Plastic Pen

  1. Step 1: Get the Pen and Remove Ink Tube.
  2. Step 2: Push and Wiggle the Hollow Ballpen Tube.
  3. Step 3: Keep the Pen Wiggling Until the Lock Comes Off.
  4. Step 1: Wear Protective Gloves.
  5. Step 2: Take an Empty Fizzy Drink Can.
  6. Step 3: Insert the shim into the lock.
  7. Step 4: Depress the Bike Lock.
  8. Pro Tips:

How do you break a bike lock with a hammer?

Hammer until the U-lock breaks. Keep hammering against the keyhole area of the U-lock. You may have to hammer for 30 seconds or so until a piece breaks off of the bar, after which breaking it will become much easier. Focus your hammering against the broken area of the lock.

How do you unlock a onguard bike lock?

How to Reset an Onguard Lock

  1. Arrange the dials to your current or pre-set four-digit combination.
  2. Press the “Open” button and pull the Onguard lock shackle to the open position.
  3. Rotate the reset wheel, on the side of the lock, clockwise until it stops.
  4. Use the dials to input a new four-digit combination.

Leave a Reply

Your email address will not be published. Required fields are marked *